Boatman Group Oy myy legendaarisia Finvalin kalastusveneitä. Tervetuloa tutustumaan – ota yhteyttä, niin sovitaan tapaaminen!
Soita +358 500 457 623 tai lähetä sähköpostia lonnberg@boatmangroup.fi
Nyt kannattaa hyödyntää myös Santanderin edullinen rahoitustarjous!
Terveisin John Lönnberg
KURKKAA
TARJOUS
korko
1,49 %
FINVAL
475 EVO
4 hlölle
Mitat 4,72 x 2,12 m
Paino 510 kg
Kone 60–75 hp
FINVAL
TILLER 475
5 hlölle
Mitat 5,59 x 2,28 m
Paino 760 kg
Kone 60–150 hp
VAKIOVARUSTUS:
-
all-welded hull made of marine aluminium AlMg4,5Mn (5083), 3 mm thickness
-
special wear-resistant and anti-slip coating on gunwale
-
outer sides are covered with a hydrophobic wrap (color to choose)
-
bow deck and cockpit covered with grade-marine cut-loop carpet
-
inner boards and stern platform covered with grade-marine cut-loop carpet
-
command console near the stern platform
-
built-in fuel system with 53 liter aluminium tank
-
shelf along the starboard with a storage for two rods up to 2.5-3 m long
-
shelf along the port with a storage for two rods up to 2.5-3 m long
-
aluminium 90 liter livewell with timer and bilge pump
-
fixed driver's seat pedestal
-
two bases for seats pedestal in cockpit for passengers
-
two Premium seats for driver and one passenger
-
two bases for seat pedestal in bow and stern platforms
-
12V power outlet on the bow platform
-
double power socket USB 5V2A on the command console
-
removable LED navigation lights
-
dry storage compartments with drainage system
-
four stainless steel mooring cleats
-
preparing for installation of echo sounder, electric motor and electric winch
-
ten stainless steel hatch latches: 6 with locks, 4 without locks
-
anchor handle non-lock in livewell's hatch
-
passenger handle on the port
-
rubber holders for rods at portside and starboard shelves
-
automatic bilge pump
FINVAL
550 EVO
6 hlölle
Mitat 5,59 х 2,28 m
Paino 760 kg
Kone 115 hp
-
all-welded hull made of marine aluminium AlMg4,5Mn (5083) 3-4 mm thickness
-
special wear-resistant and anti-slip coating on consoles and gunwale
-
outer sides are covered with a hydrophobic wrap (color to choose)
-
two consoles with walk-through windshield and center underneath door between them
-
bow deck and cockpit covered with grade-marine vinyl
-
inner boards and stern platform covered with grade-marine cut-loop carpet
-
built-in fuel system with 97 liter aluminium tank
-
central under-deck locker for six rods up to 2.5 m long
-
shelf along the starboard with a storage for two rods up to 2.5 m long
-
shelf along the port with a storage for two rods up to 2.5 m long
-
single-circuit plastic illuminated 110 liter livewell
-
two Ergolux seats (for driver and passenger)
-
two convertible seats built in a stern platform
-
two bases for seat pedestals on bow and stern platforms
-
two 12V power outlets in driver’s and passenger’s consoles
-
dry lockers with drainage system and rugs
-
organizer for spinning rods and fishing tackle
-
four push-up cleats of stainless steel
-
niche for keeping a landing net
-
preparing for installation of audio system, chartplotters, electric motor and electric winch
-
LED-lighting of console gloveboxes and shelves in the boards
-
T73 NRFC Ultraflex mechanical anti-feedback steering system, premium polyurethane steering wheel, steering cable
-
automatic bilge pump
FINVAL
FISH PRO 505
4–5 hlölle
Mitat 5,05 x 2,10 m
Paino 625–675 kg
Kone 80 hp
Kone 100 hp
FINVAL
FISH PRO 555
6 hlölle
Mitat 5,59 х 2,28 m
Paino 760 kg
Kone 115–150 hp
-
all-welded hull made of marine aluminium AlMg4,5Mn (5083) 3-4 mm thickness
-
special wear-resistant and anti-slip coating on consoles and gunwale
-
outer sides are covered with a hydrophobic wrap (color to choose)
-
two consoles with walk-through windshield and center underneath door between them
-
bow deck and cockpit covered with grade-marine vinyl
-
inner boards and stern platform covered with grade-marine cut-loop carpet
-
built-in fuel system with 125 liter aluminium tank
-
central under-deck locker for six rods up to 2.7 m long
-
single-circuit plastic illuminated 110 liter livewell
-
two Ergolux seats (for driver and passenger)
-
two convertible seats built in a stern platform
-
two bases for seat pedestals on bow and stern platforms
-
two 12V power outlets in driver’s and passenger’s consoles
-
open shelves with built-in stainless steel cup holders along the port and starboard
-
dry lockers with drainage system, natural ventilation and rugs
-
organizer for spinning rods and fishing tackle
-
six push-up cleats of stainless steel
-
niche for keeping a landing net
-
preparing for installation of audio system, chartplotters, electric motor and electric winch
-
LED-lighting of console gloveboxes and shelves in the boards
-
T73 NRFC Ultraflex mechanical anti-feedback steering system, premium polyurethane steering wheel, steering cable
-
automatic bilge pump
FINVAL
510 RANGY
4 hlölle
Mitat 5,10 x 1,90 m
Paino 370 kg
Kone 60 hp
510 RANGY SC
2 hlölle
Mitat 5,10 x 1,90 m
Paino 450 kg
Kone 60 hp
VAKIOVARUSTUS 510 RANGY SC:
-
all-welded hull made of marine aluminium AlMg4,5/5083Mn, 3 mm thickness
-
special wear-resistant and anti-slip coating on console and gunwale
-
outer sides are covered with a hydrophobic wrap (color to choose)
-
bow and stern platforms, side shelf covers and cockpit covered with grade-marine vinyl
-
inner boards, side walls of shelves and platforms covered with grade-marine cut-loop carpet
-
rod storage for five rods up to 2.15 m long
-
port shelf with storage for two rods up to 3.0 m long along the port
-
63 liter livewell with auto filling and timer
-
unit control buttons for electrical equipment of the boat
-
LED navigation lights
-
rubber holder for rods on the shelf portside
-
two bases for seat pedestals in cockpit and one base for seat on bow platform
-
two Premium seats
-
preparing for installation of chartplotters, electric motor and electric winch
-
dry storages with drainage system
-
four stainless steel mooring cleats
-
six stainless steel latches (3 with lock/ 3 without lock)
-
automatic bilge pump
-
12V power outlet
-
double power socket USB 5V2A
-
T73 NRFC Ultraflex mechanical anti-feedback steering system, premium polyurethane steering wheel, steering cable
FINVAL
SPORT ANGLER 555
3 hlölle
Mitat 5,59 х 2,28 m
Paino 760 kg
Kone 115–150 hp
FINVAL
SPORT ANGLER 685
6 hlölle
Mitat 5,59 х 2,28 m
Paino 760 kg
Kone 250–300 hp
VAKIOVARUSTUS:
-
all-welded hull made of marine aluminium AlMg4,5Mn (5083) 3-4 mm thickness
-
special wear-resistant and anti-slip coating on consoles and gunwale
-
outer sides are covered with a hydrophobic wrap (color to choose)
-
two consoles with walk-through windshield and center underneath door between them
-
boards, bow and stern platforms covered with grade-marine cut-loop carpet
-
cockpit deck covered with grade-marine vinyl
-
transom platform covered by soft anti-sliding SeaDek
-
transom platform covered by soft anti-sliding material SeaDek
-
built-in fuel system with 250 liter aluminium tank
-
two rod lockers in bow platform for four rods up to 2,7 m long each one
-
big locker on bow platform with additional place for storage of four rods up to 2,2 m long and their fixation system
-
two ROD TAMER™ straps for holding rods on the bow platform
-
plastic self-filling illuminated 130 liter livewell with oxygenator in stern platform
-
plastic self-filling illuminated 110 liter livewell with oxygenator in bow platform
-
EZ Pump™ advanced water pick-up system
-
the set of two Bassboat seats
-
the set of two marine suspension seats Shockwawe S5
-
Bike fishing seat on air-pedestal
-
bow storage compartment with the place for storage Bike fishing seat
-
two pedestal bases for Bike seat on bow and stern platforms
-
12V power outlet on the passenger console and double power socket USB 5V2A on the captain console.
-
dry lockers with drainage system
-
six push-up cleats of stainless steel
-
compression stainless steel latch (8 with lock/ 4 without lock)
-
preparing for installation of audio system, chartplotters, electric motor and electric winch
-
LED-lighting of cockpit and storage compartments
-
lux waterproof/sunproof snap-in travel/mooring cover (black color)
-
premium polyurethane steering wheel
-
automatic bilge pump
-
traction battery installation compartment
